Description of the manufacturing process of textile yarns from continuous glass fibers. Detailed production flow chart, clickable for additional information. From PPG Industries.
Short descriptions of fleece skirting, and wool washing, picking, carding, roving, spinning and finishing processes. From the Blackberry Ridge Woolen Mill web site.
Technical paper about research into the development of a technology aimed at manufacturing yarns from antimicrobial and antifungal fibers for apparel fabrics. Authors: Tadeusz Jackowski and others.
Study analysing a hypothetical model of the close cross-sectional structure of yarn, and some peculiarities of close packing of yarn. Authors: Donatas Petrulis and Salvinija Petrolyte.
Comparative study addressing the effect of size concentration and lubrication on yarn characteristics and weaving performance of conventional ring spun and air-jet spun polyester and cotton blended yarns. Authors: Howard L. Thomas Jr. and James M. Zeiba.
Technical paper about the evaluation of yarn strength changes, and the auto-correlation functions of the strength of short yarn links in standard yarn breakage tests. Author: Pavol Lizak.
Technical paper about an investigation of the properties of yarns from cellulose acetate fibers derived from cotton linters or wood pulp cellulose, and manufactured by different commercial yarn spinners. Authors: R. Pociene and others.
Technical paper presenting an experimental comparison of fancy yarns of various structures, using two different theoretical models for predicting the coil length of the binder yarns. Authors: S. Perulyté and D. Petrulis.
Technical paper analysing the effects of the knitting process, washing procedures and tumbling on the tensile characteristics of blended yarns constructed from wool, cotton and acrylic. Authors: B. Tvarijonaviciené and others.
Technical paper presenting the results of a study on the effect of mechanical processing procedures on the presence of defects in cotton by examining samples of four different ginning and lint cleaning combinations, collected after carding and combing. Authors: Karin R. Jacobson and others.
Technical paper about the establishment of a dynamic model for two-strand yarn processing through approximating the oscillating frequencies of sirofil spinning in horizontal and vertical directions, enabling the analysis of the stability and chaotic characters of sirofil spinning and resulting in a suggestion of optimal spinning conditions for this system. Authors: Li-Na Zhang and Ji-Huan He.
Technical paper presenting the results of a study on the effects of various spindle diameters and working periods on the properties of viscose MVS yarns, evaluated on the basis of unevenness, hairiness, elongation at break, tenacity and work-of-break (B-work) values. Authors: Huseyin Gazi Ortlek and others.
Technical paper presenting an analysis of the quality parameters of carded and combed medium staple cotton yarns of various linear densities manufactured using the ring, compact and rotor spinning technologies. Authors: Lidia Jackowska-Strumillo and others.
Review of basic research and new concepts in the processing of flax and hemp fiber focused on the production of cotton and wool like fibers and yarns. Authors: Waldemar Cierpucha and others.
Technical paper presenting a study about cotton fiber damage and its effect on the properties of ring and open-end rotor spun greige and dyed melange yarns. Authors: A.A. Gharehaghaji and others.
Technical paper about the use of untoxic and water soluble polymers in cotton yarn sizing and bleaching operations. Authors: Dragan M. Djordjevic and others.
Working paper summarizing the results of an evaluation of a mixture of water soluble aromatic polycarboxylic acids produced by caustic oxygen oxydation of coal for its potential as warp sizing agent for continuous filament yarns. Authors: Keith B. Bozer and others.
Technical paper investigating the knittablity of glass ply yarns of different parameters by testing their mechanical performance using a self-developed knit simulating apparatus. Authors: Xiao-ming Liua and others.
Technical paper examining breaking force, elongation at break and abrasion resistance before and after the sizing of yarns spun in five different spinning mills. Authors: Stana Kovacevic and Zeljko Penava.
Technical paper presenting the results of a comparative study of the effectiveness of quality control in mono-head high-speed and the traditional push-bar type drawing systems. Authors: A.K.M. Mahabubuzzaman and others.
Technical paper presenting a study of the friction behaviour of as-spun yarns as part of a larger research effort aimed at developing methodologies which can be utilised for fiber surface characterization. Authors: Yehia E. El Mogahzy and others.